Bandpass Filters Explained
The Maxview range of Masthead Bandpass Filters has been specifically designed for digital installations. All models are fully screened to EN50083-2 and are designed and optimised specifically for use as high performance passive front-end filters for both MATV and domestic UHF TV systems. The filters have low insertion loss and sharp roll off outside the band edges. They are intended to greatly reduce any unwanted signals just below or above the wanted UHF TV group so as to provide clean interference free (off air) analogue and digital UHF TV signals for the distribution network. All of the Masthead Bandpass Filters are designed for indoor or outdoor use and for mounting close to the aerial. They are designed for mast fixing with the releasable cable tie provided or for wall fixing using the drill out tabs. The snap lock latches and cable guides on the weatherproof outer housing and 'F' type RF connectors on the diecast inner housing ensure a quick, easy and precise installation.
|
|
|
|