Guide to Fitting an 'F' Connector
|
|
Diagram of f connector
|
|
Step1
First cut the cable to the required length
|
|
Step2
Strip away approximately 15 mm of outer insulation. Next, gather strands of copper braid together and wind back around the outer insulation. If cable is tape and braid, cut tape to be flush with outer insulation
|
|
Step3
Strip away about half of the inner insulation around the inner copper wire. Check that none of the copper braid is touching the inner copper wire
|
|
Step4
Feed the inner copper wire through the connector and screw clockwise to tighten
|
|
Step5
Finally cut off inner copper wire to about 3mm beyond the plug body.
|
|